[Traceman]

Who here is an expert on probing with a Haas or Surfcam that might could talk me through setting this up? See the attached picture.

What we have is a tube thats machined with holes already. Well they had us weld up a few of the holes and the heat resulted in "egging" the part up to .023" on the ones we checked. Now they want us to come back and put .007 deep scribed indicator lines like you see in the drawing at each hole location. I am thinking this would be a perfect application to use a probe and the 4th axis to set a "z" work offset at each line location so the engraver does not go too deep.

Any help would be appreciated.