Howdy all,
We recently began recovering our 1993 Hardinge Conquest Super GT lathe after the serious flooding from Hurricane Irene. All the 0TC control boards were removed and cleaned according to what FANUC advised. Machine fires up but we had to replace the one memory board.
Here's where we are running into an issue. We do not have the 900 parameters and neither does Hardinge. We were able to purchase a copy of the DWORD and standard parameters from our supplier, but it seems that no one has what we need. We (stupidly) never made any kind of back ups of the parameters in the history of the machine.
What I need to find out is are we up poop's creek, or is there something that we can do?