586,121 active members*
3,324 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > Uncategorised CAM Discussion > LazyCam not generating G-Code

Thread: LazyCam not generating G-Code

Results 1 to 2 of 2
  1. 09-21-2011, 01:13 AM #1
    Davedbq
    Davedbq is offline Registered
    Join Date
    Jan 2005
    Posts
    19

    LazyCam not generating G-Code

    I have gotten my Solsylva CNC machine up and running and have managed to create a good test piece in foam of Homer Simpson and the Indian motorcylce logo. So this I feel is a good start. I wanted to start cutting some parts out of wood but came across a problem trying to generate the G-code for the parts using LazyCam. The first part that I tried is simply a square with a round recessed pocket in the middle. The part is only 1/2 thick with a 1/4 pocket depth. I plugged in what information I needed in LazyCam but it will not generate the G-code for Mach3. The engravings worked beautifully. Does anyone know what is happening here? I could use the help. Thanks.
    Reply With Quote Reply With Quote
  2. 09-21-2011, 01:41 AM #2
    ger21
    ger21 is offline Community Moderator
    Join Date
    Mar 2003
    Posts
    35538
    I don't use or recommend LazyCAM, but there's a manual here that might help.
    Login
    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Mastercam X Not generating the correct Z axis G-code
    By orangelss in forum Mastercam
    Replies: 3
    Last Post: 04-29-2011, 07:12 AM
  2. LazyCam only generating 49 lines of Gcode
    By SigUser in forum Mach Software (ArtSoft software)
    Replies: 1
    Last Post: 05-07-2010, 12:12 AM
  3. LazyCam Code Posting
    By Telly in forum Machines running Mach Software
    Replies: 13
    Last Post: 12-22-2009, 02:22 PM
  4. Generating code with Camsoft AS3000
    By Bap in forum CamSoft Products
    Replies: 4
    Last Post: 09-21-2007, 07:26 PM
  5. Generating code from solid
    By adryan in forum BobCad-Cam
    Replies: 3
    Last Post: 03-06-2007, 11:10 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules