we are getting machine simulation going in Gibbscam now. What about machine models? I am looking for some Haas and Okuma lathe models. Where can I find them or do we have to build them?
we are getting machine simulation going in Gibbscam now. What about machine models? I am looking for some Haas and Okuma lathe models. Where can I find them or do we have to build them?
Probably have to buy them. Nothing is free.
If you are under maintenance go to https://online.gibbscam.com
There's a link to samples.
Sample Machine Sim Models
Daewoo MX 2500 - r3.exe(3.32mb) 2011-03-04
e650HS-SM - r5.exe(3.58mb) 2011-03-04
Fadal VMC 4020 - r3.exe(1.89mb) 2011-03-04
GildemeisterSprint65 - r2.exe(1.85mb) 2011-03-04
Haas Vert 5th - r3.exe(7.67mb) 2011-03-04
Integrex200 IV ST - SM - r6.exe(7.15mb) 2011-03-04
Mazak e-650H-II-3000u - r4.exe(1.3mb) 2011-03-04
Mazak Variaxis - r2.exe(2.92mb) 2011-03-04
Mori NT4250 - r4.exe(630.41kb) 2011-03-04
Mori NZ2000_T3Y3 - r2.exe(1.39mb) 2011-03-04
Nexus 4000 Horizontal - r2.exe(3.46mb) 2011-03-04
Okuma A_C - r3.exe(2.6mb) 2011-03-04
Okuma Bridge Machine 5Axis - r4.exe(2.53mb) 2011-03-04
ST_TS_NSM_10Pos_BarFeed - r2.exe(1.16mb) 2011-03-04
Twin_Turn_No_Holders - r3.exe(2.91mb) 2011-03-04
I am looking for a machine sim model for a thermwood CNC gantry with 5 axis.
If anyone has one or can make one for me?
Matthew
Matthew Percival: http://www.3dreveng.com
Laser Scanning, reverse engineering and Rapid Prototypes with the Fortus 400MC
Looking for Thermood machine sim model for Gibbs or someone who can model one for me.
Willing to purchase?
Matthew
Matthew Percival: http://www.3dreveng.com
Laser Scanning, reverse engineering and Rapid Prototypes with the Fortus 400MC