mitsu m70 alarm P32 Illegal address
Results 1 to 3 of 3
-
09-29-2011, 09:32 PM #1
Registered
- Join Date
- Sep 2011
- Posts
- 0
mitsu m70 alarm P32 Illegal address
-
09-29-2011, 10:04 PM #2
Gold Member
- Join Date
- Mar 2003
- Posts
- 2932
Without seeing the section of your program where the alarm occurs, it's difficult to pinpoint the problem.
P 32 Illegal address
An address not listed in the specifications has
been used.
• Check and revise the program address.
• Check and correct the parameters values.
• Check the specifications.
-
10-03-2011, 02:59 PM #3
Registered
- Join Date
- Jul 2007
- Posts
- 284
I agree.
If you can post the line in your program where this alarm occurs plus the line under it maybe we can tell you better what might be wrong.
Reply With QuoteSimilar Threads
-
Alarm Z70:illegal abs, Mitsubishi Meldas M64 controller
By Vezku in forum Mazak, Mitsubishi, MazatrolReplies: 0Last Post: 09-15-2011, 08:40 PM -
yasnac alarm code 13 (no address)
By KHOAKHOA20078 in forum DNC Problems and SolutionsReplies: 0Last Post: 05-12-2010, 02:28 AM -
009 P/S ALARM (ILLEGAL ADDRESS INPUT)
By macrosat in forum SolidCAM for SolidWorks and SolidCAM for InventorReplies: 2Last Post: 07-30-2009, 07:38 AM -
Fanuc O-MD ILLEGAL ADDRESS INPUT
By macrosat in forum FanucReplies: 9Last Post: 07-30-2009, 03:49 AM -
Macro alarm "009 ILLEGAL ADDRESS INPUT"
By theemudracer in forum FanucReplies: 7Last Post: 12-26-2006, 04:57 PM
Posting Permissions
