Hello, I have the same problem, can someone help me on how to fix the E10 Memory over. Thaks,
- - - Updated - - -
Hello, I have the same problem, can someone help me on how to fix the E10 Memory over. Thaks,
Hello, I have the same problem, can someone help me on how to fix the E10 Memory over. Thaks,
- - - Updated - - -
Hello, I have the same problem, can someone help me on how to fix the E10 Memory over. Thaks,
I've found out that "prosiz" parameter in "option 2" must to be set properly.
according to my options list it must to be = 3, it means 64k or 32K, but I get no E10 "memory over" alarm if set it = 0 only. Got formatting passed with "format complete" message. BUT I see 6k of memory area only.
On CPU PCB MC111 I see 4 256k x 8 chips.
Any suggestions?
Last edited by guhl; 01-04-2018 at 08:41 AM.
Morning everyone
i have an issue with a Argo A1 that operates with Meldas 50.
At the moment i am able to manually operate all axis but when i try to run a programme it stops at random points. i have looked throught the fault code history and the code is typically M01 0003 and M01 0007. Does anyone here have any advice? i have tried looking through the book but no joy as of yet.
Thanks for your help.
M01 are operation errors which basically occur due to incorrect programming etc.. For eg M01 0007 relates to software stroke end. Maybe the offsets defined in your program are wrong.
@chrispick82 hey mate I just took purchase of the exact same machine can we chat trying to get it to tool change and run the dnc and there is no info out there and the manuals look to be written by a 2 year old. My email is [email protected].
Hope to hear from you cheers James.
onthebumper... Once I did your "2nd place" instructions I was able to get into the Axis Parameters and view the OT- and OT+ values. How do I get my Parameter/Tool Parameter screen to look like it did prior to completing the "2nd Place" instructions? Since I went into Diagnostics > PLC I/F and typed (1001)()(M) INPUT it seems to have changed my original Axis Parameters screen in Tool Parameters; I can no longer see OT CHECK N, OT CHECK P, and OT CHECK OFF.
-Jonathan