[M.Abid]

I have a techno cnc router hd series 3 phase need to run on single phase power.
Is there any way to change the machine to 1 phase .
I guess if I change the vfd ?
Is it possible to do.

[TechnoCNCSystem]

M.Abid,
The best solution is to contact American Rotary and ask for a 15 amp phase converter for a CNC.
Here is the link: Phase Converters | Power Transformers | Power Accessories | American Rotary
Let us know if you need any further assistance.
Tim O'Connor
Techno CNC Systems, LLC
516-328-3970 x297
Techno CNC Router Systems - CNC Industrial Routers and Plasma Cutters

[M.Abid]

But its ok to use rotary phaae converter

Sent from my GT-N7100 using Tapatalk now Free

[TechnoCNCSystem]

Yes, but we recommend American Rotary to supply an appropriate one for our CNC machines.

[M.Abid]

Thank you techno for the reply and for helping . Iam in dubai one option is to buy american rotary its ok I will mail them. But if I change the vfd which delta in hd series can I get suolitions?

Sent from my GT-N7100 using Tapatalk now Free

[TechnoCNCSystem]

M. Abid,
Email Ken McBride at [email protected] here at Techno to purchase the appropriate inverter for your machine. The inverter has to be programmed and this can present quite a bit of difficulty if done out in the field by a customer.
Tim

[M.Abid]

Today I power on my techno hd series cnc router for the first time every thing is ok but I forget to remove the 2 metal brakets which is bolted on the gantry and the body.
I start the machine and press y+ to move in y direction but the gantry dosent move and vibrate beasuce its fixed.
Now the question is that is their is any damage to the stepper motor or the gear? I press the y+ button for 1 or max 2 seconds then stop when ia saw that its not moving.

Sent from my GT-N7100 using Tapatalk now Free

[M.Abid]

Hello every one thanks for the last reply.

Now need to know the rails carriages.
Iam not using the dust collector and when I cut MDF lots of dust on the rails build up. So question is that can the rails carraiges jammed beacuse of the dust? I own a techno hd cnc router.


M.ABID
THANK YOU



Sent from my GT-N7100 using Tapatalk