[Herbertkabi]

hi HCE,
Today was not free time to make changes in velocity tab in machine setup,
Spent all day with urgent works and then one young guy help me with
faceted surface when curved cut. He made some tricks with rhinocam,
Now everything is fine, no faceted surfaces anymore, but NC file for simple
50mm ring with 4mm centre hole is 531 KB , is in normal ?
Made three probes with different spindle speed - 9000, 14000 and 28000 rpm,
Materjal is 8mm 7075, enmill 2mm x 9, two flute carbide.
This young guy is very smart, has touched my cnc stuf just only few months he knows already all, he speaks that all the trick was about curved line continually consists from number of straight lines, but when before was not much these lines then now theses are hundred or thousands time more and every beginning and end of line need to be defined ... oh dear, perhaps somebody can explane these things bit wiserly, may be we are not on the right way at all ... I mean why before was not such kind of problems.
cheers,

PS:
Perhaps someone llikes to see this 531 KB NC fail for 50mm ring,
I have no idea how to show it in this place.
Beginning looks like this:
%%
G90 G21
S0
S4851
G00Z1.
X1.Y0.
G01Z-1. F30
Y0.009 F60
Y0.018
Y0.027
Y0.036
X0.999Y0.045
Y0.054
Y0.063
X0.998Y0.072
X0.997Y0.081
X0.996Y0.089
Y0.098
X0.995Y0.107
X0.994Y0.116
X0.993Y0.125
X0.991Y0.134
X0.99Y0.143
X0.989Y0.152
X0.988Y0.16

middle part like

X-15.758Y20.68
X-15.722Y20.708
X-15.685Y20.735
X-15.649Y20.763
X-15.612Y20.79
X-15.576Y20.817
X-15.539Y20.845
X-15.503Y20.872
X-15.466Y20.899
X-15.429Y20.926
X-15.393Y20.953
X-15.356Y20.98
X-15.319Y21.007
X-15.282Y21.034
X-15.245Y21.061
X-15.208Y21.088
X-15.171Y21.114
X-15.134Y21.141
X-15.097Y21.167
X-15.06Y21.194
X-15.023Y21.22
X-14.985Y21.247
X-14.948Y21.273
X-14.911Y21.299
X-14.873Y21.325
X-14.836Y21.351
X-14.798Y21.377

end end like

X-25.985Y-0.867
X-25.987Y-0.821
X-25.988Y-0.776
X-25.989Y-0.73
X-25.99Y-0.684
X-25.992Y-0.639
X-25.993Y-0.593
X-25.994Y-0.548
X-25.995Y-0.502
Y-0.456
X-25.996Y-0.411
X-25.997Y-0.365
X-25.998Y-0.319
Y-0.274
Y-0.228
X-25.999Y-0.183
Y-0.137
Y-0.091
Y-0.046
X-26.Y0.
G00Z1.
M30