Actually, this is a continuation of another thread started in 2007. I think there's a link in the first post. So it'll be 14 years since I started, if I get it running next year.
Actually, this is a continuation of another thread started in 2007. I think there's a link in the first post. So it'll be 14 years since I started, if I get it running next year.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
I've been looking forward to seeing this machine taking advantage of those dual heads for a long itme. I thought about f for a while myself and decided ATC spindles premeasured tools was a better choice for me.
Bob La Londe
http://www.YumaBassMan.com
Yeah, let's add a few more years to this.So it'll be 14 years since I started, if I get it running next year.
So, it turns out that the new house has brought a lot of new projects, that will be ongoing for years. Who knew?
With any luck, maybe I can start assembling some of these parts that I cut years ago.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
And I'll get all three ATC spindles running before June. MUST!!!!
-Andy B.
http://www.birkonium.com CNC for Luthiers and Industry http://banduramaker.blogspot.com
Hi Gerry - Great to hear your txt again. Would be excellent to see a modicum of activity with Z2... Peter