586,100 active members*
2,680 visitors online*
Register for free
Login

Thread: Part Count in Fanuc 21 MB

Results 1 to 2 of 2
  1. 10-22-2011, 12:36 PM #1
    M.RISHIKESH
    M.RISHIKESH is offline Registered
    Join Date
    Dec 2006
    Posts
    310

    Part Count in Fanuc 21 MB

    Dear All

    We have got Mitsubishi VMC with Fanuc 21MB

    Part count, which appears at the bottom of Position Screen, is not getting updated

    Please let us know on how to activate this so that at the end of ever Auto cycle, part count will increase by 1

    Best Regards,

    M. Rishikesh
    Reply With Quote Reply With Quote
  2. 10-22-2011, 01:29 PM #2
    fordav11
    fordav11 is offline Gold Member
    Join Date
    Aug 2011
    Posts
    2517
    check parameter 6700 bit 0 (PCM) & 6710

    6700 Bit 0
    M code that counts the total number of machined parts and the number of
    machined parts
    0 : M02, or M30, or an M code specified by parameter No.6710
    1 : Only M code specified by parameter No.6710

    6710
    M code that counts the total number of machined parts and the number of machined
    parts
    [Valid data range] 0 to 255 except 98 and 99
    The total number of machined parts and the number of machined parts are
    counted (+1) when the M code set is executed.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Doosan Puma 2000sy fanuc 31i control Machine stop when required part count achieved
    By MSFAB in forum Daewoo/Doosan
    Replies: 6
    Last Post: 01-31-2012, 04:34 AM
  2. What is important part count or utilization
    By chrisryn in forum MetalWork Discussion
    Replies: 31
    Last Post: 07-15-2009, 09:06 AM
  3. Encoder Count
    By Billiam in forum Servo Motors / Drives
    Replies: 1
    Last Post: 03-16-2009, 03:20 PM
  4. A light-weight table/bearing assembly with a low part count.
    By greybeard in forum Linear and Rotary Motion
    Replies: 12
    Last Post: 11-10-2005, 12:16 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules