586,069 active members*
3,389 visitors online*
Register for free
Login

Thread: fanuc 3m lost parameters

Results 1 to 5 of 5
  1. 10-22-2011, 05:29 PM #1
    zosos
    zosos is offline Registered
    Join Date
    Nov 2005
    Posts
    17

    fanuc 3m lost parameters

    Great forum!

    I am resurrecting a Tree Kira VMC 1984

    I lost the parameters on a fanuc 3m-c. Then got them reloaded.
    I need help with parameter/diagnostic adjustments to reinstate the g41/g42 on a 3m-c controller. Everything seems to be working now, except the g41/g42 which was working before the data loss. Thanks.
    Reply With Quote Reply With Quote
  2. 10-22-2011, 05:39 PM #2
    Al_The_Man's Avatar
    Al_The_Man
    Al_The_Man is offline Community Moderator
    Join Date
    Dec 2003
    Posts
    24221
    PM sent, not sure if it will help?
    Al.
    CNC, Mechatronics Integration and Custom Machine Design

    “Logic will get you from A to B. Imagination will take you everywhere.”
    Albert E.
    Reply With Quote Reply With Quote
  3. 10-22-2011, 05:55 PM #3
    zosos
    zosos is offline Registered
    Join Date
    Nov 2005
    Posts
    17
    Thanks for that...I do not see the answer there..
    Reply With Quote Reply With Quote
  4. 10-22-2011, 09:35 PM #4
    zosos
    zosos is offline Registered
    Join Date
    Nov 2005
    Posts
    17
    At the machine now... found the 996-999 parameters (all zero's,) they did not print out when I did the backup.....Me thinks that is the source of the problem. Any Ideas?
    Thanks
    Reply With Quote Reply With Quote
  5. 10-28-2011, 09:16 PM #5
    zosos
    zosos is offline Registered
    Join Date
    Nov 2005
    Posts
    17
    Thanks Guy's! All fixed!
    Great forum!
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Lost fanuc 3T parameters
    By erikturn in forum Fanuc
    Replies: 7
    Last Post: 09-24-2014, 09:00 AM
  2. Puma 8HC Parameters lost (Fanuc OT)
    By rogo in forum Daewoo/Doosan
    Replies: 9
    Last Post: 03-17-2011, 05:37 AM
  3. Fanuc O-M lost parameters
    By macperfo in forum Fanuc
    Replies: 17
    Last Post: 03-27-2009, 12:47 AM
  4. Parameters lost in Fanuc OM
    By wicked_won in forum CNC Machining Centers
    Replies: 0
    Last Post: 03-27-2008, 10:50 PM
  5. Lost all fanuc 18i (t) parameters - help!
    By stex in forum Fanuc
    Replies: 2
    Last Post: 02-08-2008, 09:00 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules