ok. well we have a problem. or you do anyway
This highlights that those parameters are totally different to a standard Fanuc 10T (which I have access to)
and more importantly almost all of your parameter values are ZERO.
My parameters in the range I mentioned above are.....
N05101 P 00000001
N05102 P 11000110
N05103 P 00000000
N05104 P 00000000
N05110 P 0
N05111 P 0
N05112 P 0
N05113 P 0
N05114 P 100
N05121 P 0
N05130 P 0
N05131 P 0
N05132 P 1000
N05133 P 250
N05134 P 0
N05135 P 0
N05136 P 0
N05137 P 0
N05139 P 250
N05140 P 50
N05141 P 25
N05142 P 2
N05143 P 60
N05200 P 00000000
These are nothing like what you have listed and you don't have any remotely similar numbers.
Plus there is a heap more parameters doing other things and they all make the machine work properly.
Since you lost all of them you will never make it work properly without a full backup of all of the parameters from a working machine like yours. That's the ONLY way you will get it working.