I'm currently using ESPRIT 2008, and I was wondering what the output window is used for. If you click View, Output Window, a white box appears at the bottom of the screen. I have clicked in the window and a curser pops up but when I start to type it goes to the Command box. Any help would be great!
Thread: Output Window
Results 1 to 3 of 3
-
11-01-2011, 09:30 PM #1
Registered
- Join Date
- Oct 2011
- Posts
- 0
Output Window
-
11-01-2011, 10:28 PM #2
Gold Member
- Join Date
- Mar 2003
- Posts
- 2932
The fact that it's an "Output" window, it would probably not allow any "Input" such as typing.
If you have a part programmed, view the Output window and run Simulation. You may see some messages there.
It's generally used for VB macro editing and debugging, and AFAIK, it's not used for day to day programming.
-
11-02-2011, 10:58 AM #3
Registered
- Join Date
- Oct 2011
- Posts
- 0
Ok thanks, just curious.
Reply With QuoteSimilar Threads
-
Window for the webcam ?
By lelelodi in forum Screen Layouts, Post Processors & MiscReplies: 1Last Post: 09-25-2012, 12:31 PM -
MDI Window
By Magnum164 in forum Tormach Personal CNC MillReplies: 6Last Post: 11-20-2010, 02:34 AM -
Automated window
By stk2008 in forum CNC Machine Related ElectronicsReplies: 5Last Post: 08-03-2010, 10:55 PM -
Missing Window
By Andre' B in forum NCPlot G-Code editor / backplotterReplies: 3Last Post: 09-18-2008, 12:59 PM -
Jogging window...
By murphy625 in forum CamSoft ProductsReplies: 10Last Post: 04-06-2005, 12:01 AM
Posting Permissions
