I have a Sieg X3 that I converted to CNC with a CNC fusion 'deluxe' kit. I'm planning on making many upgrades to it and rather than making lots of little threads, I thought I'd just have one to consolidate information and encourage me to take pictures and document the process.

Right now I am in the process of upgrading the spindle bearings and upgrading the spindle motor. I'll be posting updates in this thread from now on. If you want to get caught up, check out this thread...
http://www.cnczone.com/forums/x3_sx3...r_upgrade.html

As a little introduction, here are some videos and pictures of where I'm at and a few things I've made:

A couple time-lapse videos of me cutting things:
takCNC's Channel - YouTube

My machine (after finishing a piece):
https://lh6.googleusercontent.com/-f...0/IMG_3412.JPG

Pic of a PBC holding Fixture:
https://lh3.googleusercontent.com/-T...6/IMG_3416.JPG

Cufflinks:
https://lh3.googleusercontent.com/-q...6/IMG_3191.JPG

Shaper:
https://lh4.googleusercontent.com/-n...6/IMG_1041.JPG

TK