Hello
I am new to the CNC world and Stone world, i work since 2008 at a stone company that does restauration and reconstruction in natural stone, mostly we use a 4Axis Bridge machine(GMM Blizz) for profile work and 90% of the work we use blades.
Recently we have a bought a new machine (CMS Brembana G-Rex) I have started to use the machine about 2 weeks ago for a project we need to delivery, till now its going ok, the machine is not working 100% i am still running in to errors that need to be solve, but my biggest problem is tooling.
Current i am using Nicolai tools, but feeds and speeds that they have for the tools are some times a little bit skechty.
For this work mostly i am using segment wheels on a hard material (Irish Blue stone) with a spindle speed of 4400, 3mm removal , 500 Fixed feed and a width of cut 80mm and takes a lot of time to... to complete a piece the machine is about 25 / 35 hours.
Maybe is some one out there that can give some advice/tips in tooling.
Also if some one owns similar machine i am open to info.
I have google a lot for CNC/Stone info but mostly i can find nothing worthy.
Thanks in advance.