This is my new build cnc plasma with USBCNC control by USB5-BEding CNC - PC based CNC control
This is my new build cnc plasma with USBCNC control by USB5-BEding CNC - PC based CNC control
[ame=http://www.youtube.com/watch?v=H_bwKFnCPc4&feature=g-upl&context=G27018a8AUAAAAAAAAAA]VID 00010-20111205-2200.3GP - YouTube[/ame]
i am using usbcnc CPU V5 by edingCNC
[ame=http://www.youtube.com/watch?v=xAnijgQRgDw]VID 00012-20111205-2222.3GP - YouTube[/ame]
Rex,
Will you find some time in the near future to give us all a solid viewpoint on the Eding Control ? It is one of the newer USB controls out there and very little forum discussion exists.
Tell us about the setup,.. tell us if you found any new radical "features" that you have never seen before. Also tell us what other controls you have used in comparison.
It would be a great help to many.
Thanks
Chris L
if you are intended to use this for cnc router, cnc mill and cnc lathe it is a good
PC-based CNC control systems. But if you want to use this as control for cnc plasma i will not recommend.
Because in my experience i cannot find a suitable THC in the market that run in this control and his software. The only thing that you can use is Stand Alone THC ( i use the one made by AGELKOM from Turkey ) that's you cannot control in software not like in Mach3. But in all the aspect it is a great product and great technical Support. Also there is another guy in Netherlands (damencnc) has trying to do the THC for this cnc control and i am waiting for it.
a new update for my gantry i just add a spindle in my system
[ame=http://www.youtube.com/watch?v=M5zNxsqYViE&context=C495dcc0ADvjVQa1PpcFMGiaEClvFZdYXW-zCtTC8QEGUiUS92dHQ=]CNC Plasma 10ft. x 6ft. controlled by USBCNC Edingcnc Cutting parts 1 - YouTube[/ame]
[ame=http://www.youtube.com/watch?v=2EqUb6uJGDo&context=C4f18e6aADvjVQa1PpcFMGiaEClvFZddGljYDScGix 3xQqlnmQpyc=]CNC Plasma 10ft. x 6ft. controlled by USBCNC Edingcnc Cutting Part 2 - YouTube[/ame]
how thick was that?
This my new teknomotor
My gantry with water pan
my teknomotor beside my oxygen fuel torch
Slave axis ( A axis slave by X axis )
X axis
[ame=http://www.youtube.com/watch?v=YCnAPU6MG70&context=C4c70b95ADvjVQa1PpcFOjti53JHFkazpZ0MI8bEcX JhOBijMTrWM=]USBCNC CPU5-B by edingcnc - YouTube[/ame]
[ame=http://www.youtube.com/watch?v=p1UW4cFa9-s&context=C441934aADvjVQa1PpcFOjti53JHFka7Pk5n5Uidbq crkuD_UY46Q=]USBCNC CPU5-B Test Cutting - YouTube[/ame]