I picked up a big box of kwik switch tool holders. It didn't come with the master holder. Not a problem as I found several. I only have Cat 5 in the shop. (Besides an old dinosaur Bridgeport). I want to use the kwik switch on my Sportrac hybrid. (Which is Cat 5). So is there a taper adapter that would work?
Phoodieman
Thread: Kwik Switch Tooling For Cat 5
Results 1 to 4 of 4
-
11-22-2011, 10:54 PM #1
Registered
- Join Date
- Mar 2006
- Posts
- 92
Kwik Switch Tooling For Cat 5
-
11-22-2011, 11:03 PM #2
Member
- Join Date
- Apr 2004
- Posts
- 5742
Is this what you're looking for?
-
11-23-2011, 02:28 PM #3
Registered
- Join Date
- Mar 2006
- Posts
- 92
KS
Originally Posted by awerby
That would be it. Thanks. Thing must be heavily gold plated. $690.00 US....Might try Ebay.
-
12-07-2011, 09:43 PM #4
Registered
- Join Date
- Mar 2006
- Posts
- 92
Kwik Switch Master Holder
I tried all the sources I could find for a 200 Series Master Holder. No one has one. One place said they were tooled up to make them, but it was a 3 or 4 month lead time. I'm going to make my own. Anybody know where to get some prints or models?
Phoodieman
Reply With QuoteSimilar Threads
-
tree 2-uvr and kwik switch 200 series
By Etaniyani in forum TreeReplies: 3Last Post: 05-24-2012, 12:31 AM -
Wanted Kwik-Switch 200/20 tooling....
By nate in forum Want To Buy...Need help!Replies: 0Last Post: 02-04-2011, 07:39 PM -
WTB Kwik Switch 200 Series Tool Holders
By Shanghyd in forum Want To Buy...Need help!Replies: 0Last Post: 11-25-2009, 03:06 AM -
narex on a Kwik switch 200 ?
By tom bryant in forum MetalWork DiscussionReplies: 6Last Post: 03-12-2007, 04:30 AM -
clattering kwik switch?
By arsenix in forum Bridgeport / Hardinge MillsReplies: 5Last Post: 11-12-2005, 05:03 AM
Posting Permissions
