[vadimvc]

Hello all,

I am looking to find a CNC shop with mill and lathe capabilities providing good quality prototype work for a University robotics project. I have about 20-30 unique parts which need to be run at low quantities with 2-3 week lead times. If you are able to anodize parts that would be great as well. Largest parts are about 10 x 3 x 1 made out of Al. Quick turn around time (2 weeks) is necessary and I will be working very quickly to send parts out. I would also strongly prefer if you can accept solid models coupled with a dimensioned print calling out threaded holes and critical tolerances. If this seems like a good fit please contact me with your information and we can get things started. Use my email below or send me a private message.

vadimvc [at] wpi [dot] edu.

[FUBAR62172]

pm sent

[Pyrokuda]

Hello,

Please send prints (or sample prints) to [email protected]

Solid files are fine. I have solidworks 2011 and Mastercam X4.

Brad Briscoe
Briscoe Machining LLC
614-282-6862

[jerryt]

Hello, would like to quote, we are a small machine shop with CNC and anodize capabilities please send solid models and prints to [email protected].

Hello all,

I am looking to find a CNC shop with mill and lathe capabilities providing good quality prototype work for a University robotics project. I have about 20-30 unique parts which need to be run at low quantities with 2-3 week lead times. If you are able to anodize parts that would be great as well. Largest parts are about 10 x 3 x 1 made out of Al. Quick turn around time (2 weeks) is necessary and I will be working very quickly to send parts out. I would also strongly prefer if you can accept solid models coupled with a dimensioned print calling out threaded holes and critical tolerances. If this seems like a good fit please contact me with your information and we can get things started. Use my email below or send me a private message.

vadimvc [at] wpi [dot] edu.

[vadimvc]

Thank you to all that quoted. The job has been awarded.