Hi all,
I have a clone of a Brown and Sharpe 00G and need to know where to find a turret locking pin cam. Any leads would be helpful.
Results 1 to 2 of 2
-
11-26-2011, 03:00 AM #1
Registered
- Join Date
- Nov 2004
- Posts
- 239
Looking for turrret locking pin cam
-
11-27-2011, 02:29 AM #2
Registered
- Join Date
- Feb 2007
- Posts
- 381
Call AMSCO in Detroit, MI 1 (800) 832-6726 or NNT in Chicago. Both should have both new and used parts for this machine. We deal primarily with AMSCO for our Brownie needs.
Since this machine is a clone, you may have some problems finding the correct part. Normally they like to have the B&S serial number of the machine to help narrow it down. In any case, either of the above are knowledgeable in these machines and should be able to help you.
Mike
Reply With QuoteSimilar Threads
-
axis locking
By doc0302 in forum Deckel, Maho, Aciera, Abene MillsReplies: 2Last Post: 12-02-2010, 12:04 PM -
BMC 20 CPU locking up
By lnindustrial in forum HURCOReplies: 2Last Post: 01-30-2010, 04:22 AM -
Has anybody been experiencing CAM locking up ?
By Danno in forum Dolphin CAD/CAMReplies: 13Last Post: 10-15-2009, 08:31 AM -
stepper locking up
By luther in forum DIY CNC Router Table MachinesReplies: 8Last Post: 08-17-2007, 02:22 AM -
BCC locking up during DNC.
By Jim Estes in forum BobCad-CamReplies: 5Last Post: 02-07-2007, 05:03 PM
Tags for this Thread
Posting Permissions
