[Beaker]

Hi all

I would like to machine the Ford logo into a bit of Ally and i'm not sure of the best way to do it.
Is there somewhere on the net where I could find the correct ploted paths or should I use one of the many photo to engraving programs.

Thanks

[mxtras]

Try here:
http://www.logotypes.ru/default_e.asp

Scott

[HillBilly]

Here is some G code. You may have to remove the first line (G37 J4) something the Anilam CNC had to see.

Darek

[Beaker]

Thanks heaps guys
Darek I run Anilam as well. I run the 6000M software and G37 is not supported, what is its function.
The ford G code is great, how did you make it.

Adam

[HillBilly]

I used it on a GXM Anilam (old). The G37 is to label the program. The G code was generated through desk engrave with a logo font.

Darek

[rippersoft]

Can I ask what the name of the logo font is and where to get it?

Thanks,
RipperSoftware

[HillBilly]

I located the file but can't remember where I downloaded it.

Darek

[uav]

From G-code files Ford.txt - To acad file Ford.dxf (zip)

[Woodboz]

Thanks a bunch UAV!

[barra_300]

Is there any way to get a 2d flat DXF file of the FORD oval?