Hello all, i really couldn't find any more "appropriate" forum to post this, so i figured i would give it a shot here...
I am in the final stages of a Cincinatti-Milacron 10HC-2500 horizontal mill retrofit, using a Bardac plx20/51 DC spindle drive. My spindle motor uses a tachogen for speed feedback, no encoder anywhere. I was running a test program the other day, and realized, it would be really handy to be able to have a "spindle at speed" line going into my pc so that I can wait for that before commanding motion into my part.
So, was wondering if anybody had any ideas on if this was possible, and if so.. how? I'm starting to get a headache from delving into this manual, so any help would be great Thanks!
-Nate