Good morning, I was look at these reliefs and they are awesome. I have built my own cnc and have cut pockets and profiles but got asked if I cold help a friend out. He is a Cub scout leader and his kids attended. He had an idea to give the kids the emblem ranks as wood carvings that they could put on their wall. So he came to me because I had a cnc table. I need some help if someone could help me with one. I currently have Fusion 360, and V-carve Pro. He would like to use different types of wood for each ranking. But the overall dimensions would be 4"x 4" x 2" thick. It is basically the diamond and either a bear, cub, wolf, webelos, bobcat, and tiger coming out of the center diamond. I have not talked to him on a border but I thought I would get started. Sorry to jump on your thread.

I do have 1/16" ball nose, 1/8" ball nose, 90 deg and 60 deg v bits.

Thanks
Brooks Nelson