[JAW]

I am looking to have small round aluminum parts made from 6061-T6 and then hard coat anodized. The part is 1.020 long by .375. I am looking to keep the tolerances within +/- 0.0015. The dimensions may need to be adjusted to accommodate the hard coat anodizing. I would like to receive a quote for 75-100 pieces. Please pm or post your email address and I will send you a dimensioned .dwg file along with a step and iges model.

Thanks
Jon

[cnctoolpath1]

When you need it?.

[cnctoolpath1]

Please to quote......

Thanks;

Chris

[mike1993]

PM sent. Thanks

[jerryt]

Would Like to quote, please send drawing to [email protected].

thanks

[fubart]

[email protected]

sent from EVO 3D mobile

[BruecknerCNC]

I am looking to have small round aluminum parts made from 6061-T6 and then hard coat anodized. The part is 1.020 long by .375. I am looking to keep the tolerances within +/- 0.0015. The dimensions may need to be adjusted to accommodate the hard coat anodizing. I would like to receive a quote for 75-100 pieces. Please pm or post your email address and I will send you a dimensioned .dwg file along with a step and iges model.

Thanks
Jon

I could take a look at this for you if you still have a need.
[email protected].
Contract CNC Programming - Home