I'm looking for the pci card and software for a Intelitek / Light Machines Corp ProLIGHT 1000 I just purchased. I am putting out feelers to see if anyone can help, before going to Intelitek and buying new.

I'm using a spectralight mill right now, with Mach3. The driver board came via eBay, was inexpensive and is based on the Toshiba IC driver chip. My concern is that my ProLIGHT 1000 has the ATC, and that homing the mill might be an issue not easily accomodated with Mach3.

Any help would be appreciated.

kscotay