I'm using ArtCam 9.*** and would like to cut v-carve using 90 Deg bit, 1/4" deep with a flat bottom. Any help I could get would be appreciated.
Thread: Flat bottom v-carve
Results 1 to 1 of 1
-
12-03-2011, 11:40 PM #1
Registered
- Join Date
- Oct 2010
- Posts
- 83
Flat bottom v-carve
Reply With QuoteSimilar Threads
-
.170" Dia 1" Deep Flat Bottom comes out tapered
By nfrees114 in forum MetalWork DiscussionReplies: 11Last Post: 12-08-2010, 10:50 PM -
Flat Bottom Indexable Carbide Coolant Through Drills
By CDTooling in forum News AnnouncementsReplies: 0Last Post: 10-16-2010, 06:39 PM -
flat bottom roller burnishing tool
By qmas99 in forum MetalWork DiscussionReplies: 3Last Post: 09-27-2006, 11:17 PM -
Flat Bottom Bore
By martsto in forum BobCad-CamReplies: 1Last Post: 09-10-2006, 06:23 AM -
Flat Bottom Bore's
By TURN ME in forum MetalWork DiscussionReplies: 12Last Post: 09-05-2006, 11:16 AM
Posting Permissions
