Originally Posted by
gene8522
Using ArtCam 9.*** How can i put out a 3D view that I can e-mail to a customer for review? Also I need to get rid of the waste cut material in the view.
I don't have the program in front of me at the moment so some of the names of the menus might be wrong but... To get rid of the waste material move the z zero point of your workpiece to the bottom of your board. Then under the 3d view window click on the button on the top of the window that gives you the options for what is displayed in the window. Unselect "material" and the waste material will not show. You can't do this with a tool path preview though. To email a pict select the save option from the 3d view menu on the menu bar from the top of the window. Sometimes I have taken a screen shot and cropped it in Paint.
http://www.glenspeymillworks.com Techno LC4896 - 2.2Kw Water Cooled Spindle | Moving Table Mill from Omis 3 CMM, 500Lb granite base | Epilog Legend 32 Laser Engraver