Hello,
Got a question I have an old version of mastercam 9 and when I post out a program I can get a smooth finish it's breaking it up into lines giving me a checker board finish can't make it da anything else how do I fix this?
Hello,
Got a question I have an old version of mastercam 9 and when I post out a program I can get a smooth finish it's breaking it up into lines giving me a checker board finish can't make it da anything else how do I fix this?
You'll need to include some more info to get a good answer.
Material?
Machine?
Speed & feed?
Depth of cut?
Type of cutter?
17-4,Hurco,6500,.005,.125 carbide ball nose
Missed out the cutter size...
What are your "Tolerance" settings in the operation
OFF - will give point to point code & give a faceted appearance to a curved surface
1:1 ( or one of the others ) - should give out a lot less code, a lot more arcs, & eliminate the faceted look
the smaller the numbers the more accurate the path.....the less arcs, more point to point moves in the NC code, ... so you try find the happy number, to suit the part purpose, start around .0010"