Does anyone out there have a post for this. I have the original post I got from the original owner, but having some "issues". Would just like to compare a "CORRECT" post with mine.
Some of the problems is it WILL NOT travel down in Z in a contour toolpath with "RAMP" selected. It will just continue to travel around the surface.
There is also some problems the original owner claimed when tapping, so I haven't even tried to tap anything on the machine.
Thanks in advance, John :banana:
Machine is a Cinci Arrow 500
Results 1 to 6 of 6
-
10-23-2005, 07:57 PM #1
Registered
- Join Date
- Sep 2005
- Posts
- 84
MasterCam V9.0 SP1 for Acramatic 2100
-
10-25-2005, 09:41 PM #2
Registered
- Join Date
- Jan 2005
- Posts
- 23
MPA2100E.pst - It is included in the additional post processor installation contained in the original installation cd.
-
01-22-2006, 03:09 PM #3
Registered
- Join Date
- Jun 2005
- Posts
- 305
Do you still need a post?
I have one for the Cincinnati Arrow 1000 that I modified.
You would have to modify the PEOF section to suit your machine.
Rigid tapping works.
It supports fixture offsets H1 thru H32.
Let me know and I will post it here.ObrienDave. MasterCam since V6. Gcode since 1983.
The nose you punch today may belong to the butt you have to kiss tomorrow.
-
01-22-2006, 03:56 PM #4
Registered
- Join Date
- Sep 2005
- Posts
- 84
Dave, thanks. Sent a PM to you. John
-
09-02-2006, 11:24 PM #5
Registered
- Join Date
- Oct 2005
- Posts
- 40
I am looking for a mastercam x post for a Cincinnati Arrow 1000 mill and falcon lathe were can I find one.
-
09-03-2006, 06:08 PM #6
Registered
- Join Date
- Aug 2006
- Posts
- 4
hi friends,
i am Nirmal.I need a help that is i need a post processor file for sinumeric 810D in mastercam v9.1 Any kind hearted friend help me to get the file.My email id is [email protected]k u friends
Reply With Quote
Posting Permissions
