Hey people,
A bit off-topic but I recently bought a maxstar 150 TIG welder to weld stuff I cut with my laser system.
Here's a
picture
of small head made of 0.032 inch thick stainless steel.
The head is only two inches in length. I thought it was amazing that I was able to weld such thin stainless.
The welds arent pretty but the top portion of the head was joined to the sides. I prettied up the welds as best I could with a grinder, re-filled the voids, more grinding, buffed with a dremel, then polished with a buffing wheel.
enjoy,
Owen