I'm starting my g0704 conversion. I bought the conversion DVD from HOSS and the information has been very valuable. I am doing kind of a hybrid conversion and have purchased the parts from Billy. They are very nice!
Many thanks to HOSS for answering my questions and for the g0704 conversion DVD.
I am using HOSS's recommended electronics but have switched the power supply to a transformer based Antek 50V 600W with 12V and 5V regulated supply. I have used an Antek PS in my Joe's hybrid for many years now with very good results.
Components:
- CNC stepper mounts from Billy
- 3x Keling KL-6050 Stepper Drivers
- 3x Keling Nema 23 570 oz-in Steppers
- c35 breakout board
Results 1 to 20 of 226
Threaded View
-
12-12-2011, 12:15 AM #1
Registered
- Join Date
- Nov 2004
- Posts
- 306
My G0704 CNC conversion adventure
Reply With QuoteSimilar Threads
-
upgrading from g0704 conversion
By dsdmax in forum Charter Oak Automation Support ForumReplies: 6Last Post: 12-01-2011, 11:39 PM -
G0704 Conversion
By rcazwillis in forum Benchtop MachinesReplies: 123Last Post: 07-17-2011, 03:27 PM -
My Grizzly G0704 Conversion to CNC
By DrewSmith007 in forum Benchtop MachinesReplies: 5Last Post: 04-11-2011, 05:42 AM -
G0704 Beltdrive and CNC Conversion DVD-ROMS
By hoss2006 in forum News AnnouncementsReplies: 0Last Post: 03-14-2011, 04:35 AM -
g0704 - conversion project
By dsdmax in forum Benchtop MachinesReplies: 30Last Post: 03-02-2011, 04:03 AM
Posting Permissions
