Wed - 07:36:58 ---Program Startup
Wed - 07:37:03 ---ReConfiguration Estop.
Wed - 07:37:13 --- Initialization Macro Called on reset.
Wed - 07:40:27 ---************************************************** ******************
Wed - 07:40:28 ---Tool Change Initiated Old Tool #0 New Tool #2
Wed - 07:40:28 ---Moving Z to Tool Change Position First
Wed - 07:40:30 ---Moving X & Y to Tool Change Position
Wed - 07:40:33 ---No Old Tool to Return - Old Tool # 0
Wed - 07:40:33 ---Rotate ATC to Slot #2 For Tool #2
Wed - 07:40:33 ---Bring Z Up to Toolup Position -0.89
Wed - 07:40:34 ---Extending ATC Slide
Wed - 07:40:36 ---Slide In Extended Position
Wed - 07:40:36 ---PDB UnClamp
Wed - 07:40:38 ---Bring Z down to ToolDown -2.393 at Feed 35
Wed - 07:40:42 ---PDB Clamp
Wed - 07:40:43 ---Retracting ATC Slide
Wed - 07:40:45 ---Slide In Retracted Position
Wed - 07:40:45 ---Bring Z Up to Toolup Position -0.89
Wed - 07:40:47 ---Putting X and Y back where they were
Wed - 07:40:50 ---Tool Change Complete
Wed - 07:41:12 ---************************************************** ******************
Wed - 07:41:13 ---Tool Change Initiated Old Tool #2 New Tool #0
Wed - 07:41:13 ---Moving Z to Tool Change Position First
Wed - 07:41:13 ---Moving X & Y to Tool Change Position
Wed - 07:41:16 ---Rotate ATC to Slot #2 For Tool #2
Wed - 07:41:17 ---Bring Z down to ToolDown -2.393
Wed - 07:41:18 ---Extending ATC Slide
Wed - 07:41:21 ---Slide In Extended Position
Wed - 07:41:21 ---PDB UnClamp
Wed - 07:41:22 ---Bring Z Up to Toolup Position -0.89
Wed - 07:41:23 ---No New Tool - Leaving Spindle Empty
Wed - 07:41:24 ---PDB Clamp
Wed - 07:41:25 ---Retracting ATC Slide
Wed - 07:41:27 ---Slide In Retracted Position
Wed - 07:41:27 ---Bring Z Up to Toolup Position -0.89
Wed - 07:41:28 ---Putting X and Y back where they were
Wed - 07:41:31 ---Tool Change Complete
Wed - 07:42:04 ---************************************************** ******************
Wed - 07:42:04 ---Tool Change Initiated Old Tool #0 New Tool #99
Wed - 07:42:05 ---Moving Z to Tool Change Position First
Wed - 07:42:05 ---Moving X & Y to Tool Change Position
Wed - 07:42:08 ---No Old Tool to Return - Old Tool # 0
Wed - 07:42:08 ---Bring Z Up to Toolup Position -0.89
Wed - 07:42:19 ---New Tool # 99 was manually Inserted
Wed - 07:42:19 ---Bring Z Up to Toolup Position -0.89
Wed - 07:42:20 ---Putting X and Y back where they were
Wed - 07:42:23 ---Tool Change Complete
Wed - 07:42:46 ---************************************************** ******************
Wed - 07:42:47 ---Tool Change Initiated Old Tool #99 New Tool #2
Wed - 07:42:47 ---Moving Z to Tool Change Position First
Wed - 07:42:48 ---Moving X & Y to Tool Change Position
Wed - 07:43:04 ---Old Tool # 99 was manually removed
Wed - 07:43:05 ---Rotate ATC to Slot #2 For Tool #2
Wed - 07:43:05 ---Bring Z Up to Toolup Position -0.89
Wed - 07:43:06 ---Extending ATC Slide
Wed - 07:43:08 ---Slide In Extended Position
Wed - 07:43:08 ---PDB UnClamp
Wed - 07:43:09 ---Bring Z down to ToolDown -2.393 at Feed 35
Wed - 07:43:13 ---PDB Clamp
Wed - 07:43:15 ---Retracting ATC Slide
Wed - 07:43:17 ---Slide In Retracted Position
Wed - 07:43:17 ---Bring Z Up to Toolup Position -0.89
Wed - 07:43:19 ---Putting X and Y back where they were
Wed - 07:43:22 ---Tool Change Complete
Wed - 07:43:48 ---************************************************** ******************
Wed - 07:43:48 ---Tool Change Initiated Old Tool #2 New Tool #1
Wed - 07:43:48 ---Moving Z to Tool Change Position First
Wed - 07:43:49 ---Moving X & Y to Tool Change Position
Wed - 07:43:52 ---Rotate ATC to Slot #2 For Tool #2
Wed - 07:43:53 ---Bring Z down to ToolDown -2.393
Wed - 07:43:54 ---Extending ATC Slide
Wed - 07:43:56 ---Slide In Extended Position
Wed - 07:43:56 ---PDB UnClamp
Wed - 07:43:58 ---Bring Z Up to Toolup Position -0.89
Wed - 07:43:59 ---Rotate ATC to Slot #1 For Tool #1
Wed - 07:44:00 ---Bring Z down to ToolDown -2.393 at Feed 35
Wed - 07:44:04 ---PDB Clamp
Wed - 07:44:05 ---Retracting ATC Slide
Wed - 07:44:07 ---Slide In Retracted Position
Wed - 07:44:08 ---Bring Z Up to Toolup Position -0.89
Wed - 07:44:09 ---Putting X and Y back where they were
Wed - 07:44:12 ---Tool Change Complete
Wed - 07:44:22 ---************************************************** ******************
Wed - 07:44:22 ---Tool Change Initiated Old Tool #1 New Tool #99
Wed - 07:44:22 ---Moving Z to Tool Change Position First
Wed - 07:44:23 ---Moving X & Y to Tool Change Position
Wed - 07:44:26 ---Rotate ATC to Slot #1 For Tool #1
Wed - 07:44:26 ---Bring Z down to ToolDown -2.393
Wed - 07:44:28 ---Extending ATC Slide
Wed - 07:44:30 ---Slide In Extended Position
Wed - 07:44:30 ---PDB UnClamp
Wed - 07:44:32 ---Bring Z Up to Toolup Position -0.89
Wed - 07:44:33 ---PDB Clamp
Wed - 07:44:34 ---Retracting ATC Slide
Wed - 07:44:36 ---Slide In Retracted Position
Wed - 07:44:36 ---Bring Z Up to Toolup Position -0.89
Wed - 07:44:47 ---New Tool # 99 was manually Inserted
Wed - 07:44:47 ---Bring Z Up to Toolup Position -0.89
Wed - 07:44:48 ---Putting X and Y back where they were
Wed - 07:44:51 ---Tool Change Complete
Wed - 07:45:16 ---************************************************** ******************
Wed - 07:45:16 ---Tool Change Initiated Old Tool #99 New Tool #95
Wed - 07:45:16 ---Moving Z to Tool Change Position First
Wed - 07:45:17 ---Moving X & Y to Tool Change Position
Wed - 07:45:27 ---Old Tool # 99 was manually removed
Wed - 07:45:27 ---Bring Z Up to Toolup Position -0.89
Wed - 07:45:37 ---New Tool # 95 was manually Inserted
Wed - 07:45:37 ---Bring Z Up to Toolup Position -0.89
Wed - 07:45:37 ---Putting X and Y back where they were
Wed - 07:45:40 ---Tool Change Complete
Wed - 07:45:51 ---************************************************** ******************
Wed - 07:45:52 ---Tool Change Initiated Old Tool #95 New Tool #0
Wed - 07:45:52 ---Moving Z to Tool Change Position First
Wed - 07:45:52 ---Moving X & Y to Tool Change Position
Wed - 07:46:02 ---Old Tool # 95 was manually removed
Wed - 07:46:02 ---No New Tool - Leaving Spindle Empty
Wed - 07:46:02 ---Bring Z Up to Toolup Position -0.89
Wed - 07:46:03 ---Putting X and Y back where they were
Wed - 07:46:06 ---Tool Change Complete