[Playback]

HI, my name is Eric and i'm not a new member but it's the first time i need to ask. I work on 4axe milling G-Code and my boss have buy a Mazak QT10N-ATC and i have problem to make thread in Mazatrol. I have make BAR OUT, BAR IN, DRILL and all work fine but when i make thread the tools start in the part and finish before the X0. Like if the axe is reverse. When my boss have buy the Mazake the guy have write all the parameter and replace the battery. My question is what i miss or if it is possible i have 1 bad parameter.

Thanks!

Eric

Program

[MrMazak]

Your thread lead is 14 inches! That's one full thread every 14 inches. To make a 14 pitch thread you need to set the lead at .0714 (1/14)

[Playback]

Your thread lead is 14 inches! That's one full thread every 14 inches. To make a 14 pitch thread you need to set the lead at .0714 (1/14)

Thanks MrMazak, you resolved my thread probleme. Why the question is number of thread not thread pitch?

Thanks!


For some reader sorry to be a Canadian!