Trying to do the Assembly 2 Tutorial from the Camworks Mill and Turn tutorial that comes with Camworks. I am using the sample file that is included with Camworks called MILLASM_2.SLDASM. When I use the Stock Manager to increase the value of Z to .1 the stock grows in the X direction and not in the Z direction. What setting allows you to set the correct X,Y and Z directions to control stock size?
Thread: Stock Manager problem
Results 1 to 3 of 3
-
12-19-2011, 02:59 AM #1
Banned
- Join Date
- Dec 2011
- Posts
- 0
Stock Manager problem
-
12-20-2011, 05:49 PM #2
Registered
- Join Date
- Sep 2003
- Posts
- 35
Hi Joesph,
The stock manager is using the SolidWorks XYZ in the stock definition. So it depends on how your model is placed in regards to that. I normally glance at the 3D gnom in the lower left of the screen to see which axis to apply extra material to.
-
12-21-2011, 04:37 AM #3
Banned
- Join Date
- Dec 2011
- Posts
- 0
Thanks Lars. Never would have figured that out without your help.
Reply With QuoteSimilar Threads
-
Material Manager/Purchasing Manager - IL
By MachiningJobs in forum Employment OpportunityReplies: 2Last Post: 05-23-2011, 04:04 PM -
Problem with Esprit Lathe Stock
By bigping77 in forum EspritReplies: 7Last Post: 02-28-2011, 02:19 PM -
stock size posting problem
By basim in forum Post Processors for MCReplies: 1Last Post: 12-19-2009, 12:33 AM -
problem Bobcad V23 post manager
By paulorockmacedo in forum BobCad-CamReplies: 7Last Post: 01-19-2009, 02:27 AM -
32MP Memory Manager transfer problem
By RoboVin in forum FadalReplies: 1Last Post: 08-21-2006, 02:53 PM
Posting Permissions
