Hello all,
I have been trying to machine my parts using different UCS positions. Bob-Cad seems to work okay when I use custom UCS positions with 2-D programming. However whenever I try in the same UCS positions to do any 3-D machining, the program will use the default coordinate system. I'm just wondering if anyone has had any success at machining in different UCS positions with 3-D machining or if anyone could help me. Maybe this is just a limitation of Bob-Cad.
Thanks, Carl
Results 1 to 2 of 2
-
12-26-2011, 05:16 PM #1
Registered
- Join Date
- Apr 2007
- Posts
- 8
Bob-Cad V24 machining in UCS problem
-
12-26-2011, 06:30 PM #2
Gold Member
- Join Date
- Feb 2009
- Posts
- 2143
I believe it has been stated that 3D machining does not work in alternate UCS's...
CAD, CAM, Scanning, Modelling, Machining and more. http://www.mcpii.com/3dservices.html
Reply With QuoteSimilar Threads
-
Problem while machining
By saratbabu in forum Commercial CNC Wood RoutersReplies: 4Last Post: 05-05-2012, 05:16 PM -
Problem with machining
By caad_9 in forum CamWorksReplies: 3Last Post: 02-25-2011, 12:47 PM -
POLYGIM M20 MACHINING PROBLEM
By CHANDRU in forum MetalWork DiscussionReplies: 0Last Post: 06-26-2008, 04:11 PM -
Alignment problem when machining 2nd side
By jmcglynn in forum MetalWork DiscussionReplies: 3Last Post: 06-13-2008, 05:12 PM -
Problem on CNC machining centre (VMC)
By sunilsawant123 in forum CNC Machining CentersReplies: 2Last Post: 10-11-2007, 04:53 AM
Posting Permissions
