[eduardc800u]

Best ,

I am looking for a post ? for the Hermle c800u 5 axs (simultanius )
whit tnc 430

Want pay for it !
Thanks in advance

[rosso]

you still want the post?
i have for TNC410, i think it can help you

[tummen]

Use the heidenhain wizzard template as a start, If you cant find a ready made post for the exact mashine with graphics in it this is free and just as good starting point, we only did some minor changes to ours.

[uwdeckel]

I have a deckel maho 80 p dyn with a 430 control on it. Can you send me a sample program cutting on A+60 C+30? My post works great with the head in horizontal position while cutting with the table tilted and works great while in vertical position with table flat. For some reason when in vertical position and table tilted the machine wants to track the table rotation. My post is setup to use cycl 19.
This works great
27 TOOL CALL 9 Y S2000
28 M53
29 ;
30 M140 MB MAX
31 L A+30 C+270 F MAX M126
32 CYCL DEF 19.0 WORKING PLANE
33 CYCL DEF 19.1 A+30 B+0 C+270 F1000
34 L A+Q120 C+Q122 F MAX
But this won't work
27 TOOL CALL 9 Z S2000
28 ;
29 M140 MB MAX
30 L A+30 C+180 F MAX M126
31 CYCL DEF 19.0 WORKING PLANE
32 CYCL DEF 19.1 A+30 B+0 C+180 F1000
33 L A+Q120 C+Q122 F MAX