Hello, I need to replace this belt. I do not know where to order one.
Can anyone help me?
Here is a picture of the belt itself and the parameters (see photo).
Hello, I need to replace this belt. I do not know where to order one.
Can anyone help me?
Here is a picture of the belt itself and the parameters (see photo).
SPI have a pretty wide inventory.
Timing Belts V Belts Flat Belts Round Belts endless belt drives Routhane Belts Posi Drive Belts from SDP/SI
Al.
CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
While I was looking in google I had found that site and the belt I think I need:
A 6R19M42506 6.35mm Wide By 425mm Long, Flat belt
https://sdp-si.com/eStore/PartDetail...13&GroupID=348
But I'm from Europe, Lithuania. I have a Mastercard and for some reason it will not work in their e-store cart system. I also have Paypal.
The SPI replied that they can charge my credit card manually but that adds +10$ for this and that is more then the belt actually costs. And I don't even know if it will work for me. They can't quote shipping until :
"SDP-SI does not quote freight charges. Freight is determined by the listed rates of the carrier you choose to ship with. Size, weight, location, duties, taxes and customs can affect the price which cannot be known until order is placed, packaged and measured."
Also what does this mean they said about shipping?
"Incoterms - FOB NHP New York"
My pulley diameter is 4.5 and the belt has diameter specified as Min.pulley Dia. 6 so perhaps it will not bend at that small diameter? I need that core material would by like Fiberglass reinforcement.
Not sure if it will help, but Misumi world wide show a distribution next door in Poland.
They have quite a selection.
Al.
CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
Can you share the link to what belts they have? I can find only this site
Misumi world wide MISUMI Worldwide | MISUMI Group Inc.
I haven't checked exactly what they have, but this is a flat belt link to them.
Flat Belts | Mechanical Components for Assembly Automation - Misumi eCatalog
Al.
CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
They do not have 6mm or 6.5mm or 6.32mm or 6.35mm belts at all.
All I found was 5mm then there is 10 and more wide belts.
What if i would use timing belt (neoprene) reversed with the teeth outside would it work?
I also have some printer timing belt that would work if reversed very soft and good traction, but length does not match. It is yellow translucent perhaps you know the type? The teeth go at a slight angle too.