587,025 active members*
3,893 visitors online*
Register for free
Login

Thread: RFQ turned steel rod, easy job

Results 1 to 2 of 2
  1. 01-09-2012, 01:32 PM #1
    sidernik
    sidernik is offline Registered
    Join Date
    Jan 2012
    Posts
    0

    RFQ turned steel rod, easy job

    Need 2 of these rods turned in (preferably carbon) steel, CNC or manually.



    The fillet at the end doesn't have to be precise, but the tip has to be rounded.
    The rod diameter tolerances are 15.95mm+/-0.05mm and 7.95mm+/-0.05mm.
  2. 01-23-2012, 09:15 PM #2
    cncspec.com
    cncspec.com is offline Registered
    Join Date
    Dec 2010
    Posts
    0
    PM sent

    Sam
    Cncspec.com
« Previous Thread | Next Thread »

Similar Threads

  1. 1.5" Dia Part turned from Steel w/ flats - Qty of 100
    By yantra3d in forum RFQ (Request for Quote)
    Replies: 3
    Last Post: 05-08-2011, 04:47 AM
  2. Small Steel Plasma and Turned Pieces
    By clintster442 in forum Employment Opportunity
    Replies: 0
    Last Post: 01-27-2011, 05:13 PM
  3. RFQ on turned steel parts
    By TheGreenMachine in forum Employment Opportunity
    Replies: 3
    Last Post: 11-12-2010, 07:15 PM
  4. RFQ - Turned Steel w/ Drilled & Tapped Set Screws (Cancelled)
    By AuroraDrvr in forum Employment Opportunity
    Replies: 5
    Last Post: 04-14-2009, 07:12 AM
  5. RFQ - small mild steel turned and drilled parts
    By mcmmach in forum Employment Opportunity
    Replies: 8
    Last Post: 07-29-2005, 03:37 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules