[wishgranter]

Hello all.
im searching for Round Over Groove Router Bits - for metal or plastic not wood, but for Styrofoam. we build models of castles and buildings and need this tool to create roof. we need to create something like this http://dl.dropbox.com/u/15047343/roof.jpg with this tool, because our standard metod of creating need a LOT of time - around 3 hours for one sample.....
this tool describes it best

Industrial CNC Round Over Groove Router Bits by Amana Tool

the diameter of round part must be 4mm - 0.1575 inch...... :argue:

[ger21]

Wood bits will cut plastic. But I doubt you'll find one for metal as the point would be too brittle.
If you need a metric tool, then you'll probably need to find a european supplier.
Point Cutting Roundover Bit by Amana Tool
Groove Forming - Point Cutting Plunge Roundover Bits

[wishgranter]

GER21 - Thanx a lot, for me is no problem from where im order it, we try to make it close as possible to the 4mm - see our page MúzeumHistorickýchBudov what we do, is in 1:25 scale so we must stay close as possible that is have right scale.


THANX