Originally Posted by
zephyr9900
But Mach IS taking advantage of this. You set up acceleration and velocity as high as you can to get reliable G0 moves. What Mach DOESN'T do is derate the speeds for cutting--you can try cutting at the equivalent of G0 speed if you are brave enough. (Or type G0 instead of G1 by accident--no, I've never done that, not even once
)
One thing that seems to have been overlooked is the definition applied to G0 and G01, G0 is/was intended to rapid position axis at NON-interpolated positioning at the machines rapid rate, some machines implement rapid overide at the discretion of the MTB.
G01 uses the F value for feed and is always Interpolated moves, there also may be a feed rate overide.
Al.
CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.