Originally Posted by
tlharris
Also a cross-post, posted at support forums on
BobCAD-CAM | Powerful & Affordable CNC CAD/CAM Software Solutions
-------------------------------------------------------------
Most probably related to my other post a moment ago, but it could be a separate issue.
Same steps as before….
1) draw a simple part
2) compute toolpath
3) RMB ‘Milling Stock’ in the CAM tree, then LMB ‘Verify’…. a dialog pops up indicating “No data to verify”
Win 7/64
all Windows updates
Bobcad v24 b376
Many thanks in advance for any insight.
Post your part, then look to see that there is code to run. You may not have given it enough info.
Two Haas VF-2's, Haas HA5C, Haas HRT-9, Hardinge CHNC 1, Bother HS-300 Wire EDM, BobCAD V23, BobCAD V28