Keep getting alarm that says n0. 2103 must be commanded maintenance at C 1 Cycle.
The z axis is unable to be jogged or homed what do I need to do?
Keep getting alarm that says n0. 2103 must be commanded maintenance at C 1 Cycle.
The z axis is unable to be jogged or homed what do I need to do?
Did you solve this schmitty? I'm curious.
can some one help me out about; 2103 must be commanded maintenance at C 1 Cycle and i could not jog in z axis thanks
this sounds more like a machine alarm than a fanuc alarm what type of machine is this on ?
My machine is Daewoo DMV 3016 with Fanuc I Series control. Can you help Please Thanks And you have wonderful day .