[doug6949]

I need 50-100 trays made from UHMW or 1 inch plywood. They are 10.5 X 13.8 X 1.0 thick with six pockets, each .75 deep by 3.8 diameter. Think of a shallow muffin tray and you get the picture.

Weekend warriors are OK as long as quality and delivery requirements are met. I prefer someone in the Atlanta area.

The work is ideal for a 4X8 router, though I can modify the specs to permit machining on a cnc knee mill.

PM me for details and I will send you a DXF.

TNX;
Doug

[doug6949]

UPDATE:

My apologies to those of you waiting for a response to your PM. I did not think to take a backup copy of the drawing when I left the office after posting this RFQ.

I will attempt to get to you this week.

Thanks;
Doug

[RHCinc]

Doug, we are a company out of albany georgia and we deal with uhmw on a regular basis since we do alot of chicken plant and bakery work. Send me the info on what you are wanting done. [email protected] or [email protected]. we have cnc mills and lathes also break,shear and waterjet! Thanks
Josh

[doug6949]

This RFQ has been filled. I appreciate the responses and have saved many of them for future reference.

Thanks;
Doug