There is someone interested by a toolchange macro i created that loop each tool for mutiple parts. IE you set one variable at the program start for the part quantity for example #800=4 and the machine take the tool 1 and make all the operations on G54,G55,G56,G57 and also if you want G54 P1, G54 P2, etc. and then take the tool 2 and do all operations in reverse G57,G56,G55,G54...really usefull when you want to choose part QTY right on the floor.It also support the G5 P10000 (ai Nano HPCC) function that doesn't support macro calculation when activated. If interested reply and i will post all is needed to do it!