More Stand.
Here I flipped the top section and left original braces in place to help keep it square.


Once welded I cut braces loose with cut off wheel.


You can see here I shortened it about 5". Main reason was to bring length down to 48" so I could use one piece of sheet metal for the back.



Next comes some bracing for the coolant pan.


Ready to weld in place. Also moved the bottom braces to line up with side braces so I could but a floor in for the cabinet bottom.



Couple bends in the old bottom and welded in place.





* This Worklog post was generated using WorklogCreator - Version: 1.0.1.7
* Free Download: http://www.mod2software.com/worklogc...logcreator.zip