LG6040B laser engraver
This modle adopts three-phase motor and driver ;high-speed outside Rail ; high speed USB 2.0 data interface support ,32M high speed DSP controller .Applied in clothing ,fabric ,leather and other Soft materials .
Specification:
Laser- type:CO2laser beam
Laser power:60W
Engraving area:600X400mm
Engraving speed:0 - 1000mm/min
Cutting speed:0 - 800mm/min
Resetting position accuracy:± 0.05mm
Controlling system:DSP
Cutting thickness:0-30mm(According to imaterials)
Cooling mode:water-cooling and protection system
Gross power:≤1250W
Working voltage:220 ± 10%,50HZ(60HZ)
Operating temperature:0℃-45℃
Operating humidity:5%-95%
Controlling software:DSP
Graphic format supported:BMP,PLT, DST, DXF and AI
Net Weight:200KG