[Holzwurm56]

Hi ,
I want to use BC V23 and create a solid with the 3d cad lesson and want to create a machining file with 3d cam lesson in the getting started book .
When I want to create thr tool path allways comes the message :
" Security Failure No 4 " .
Does someone knows what this means ? Is there list with the failure messages available ?

Many thanks for every answer

Hans

[Holzwurm56]

Hello ,
here ist screem with the error message .

Hans

[dougl]

Hi Hans,

The only suggestions I have are to make sure you running as the administrator, have desktop composition and visual themes disabled. Also make sure the path to save your gcode file is correct.

doug

[nursum]

Hallo Hans,

bei BobCad ist der Refernzpunkt, sprich Nullposition schon immer etwas problematisch gewesen. Past das Koordinatensystem? Hast du das Teil selber gezeichnet? Es gibt auch immer Probleme mit der Zollumrechnung! Ich kämpfe mit BobCad seit der Release V19....und arbeite z.Zt. mit der V24

Ingo

Hi ,
I want to use BC V23 and create a solid with the 3d cad lesson and want to create a machining file with 3d cam lesson in the getting started book .
When I want to create thr tool path allways comes the message :
" Security Failure No 4 " .
Does someone knows what this means ? Is there list with the failure messages available ?

Many thanks for every answer

Hans