Well here's another fun problem. We have this Okuma & Howa Millac 8VA with a 15MA control, and just the other day the digital display on the side of the machine for the magazine's tool numbers just went out. Machine still running great, just now my operator has no idea of any tool numbers, which makes it hard to call them up to touch off. I have traced wires back and found that there is a problem with the display controller. So called okuma with this info and several pictures of all numbers on this controller, and of course none match there part numbers. So does anyone have any idea about this controller, and where I could possibly find one? Mine says it is a type III I did find a type II on ebay but nobody knows if it will work. Here are all pictures I have. Picture 903 is the cover for the controller. Also in 907 the first set of letters and numbers are hard to see but it reads "PC-10302". Any help is greatly appreciated.