586,102 active members*
2,620 visitors online*
Register for free
Login
IndustryArena Forum > CNC Electronics > Stepper Motors / Drives > Driver Recommendations For P22NRXC-LNN-NS-00 Stepper

Thread: Driver Recommendations For P22NRXC-LNN-NS-00 Stepper

Results 1 to 2 of 2
  1. 02-23-2012, 05:29 AM #1
    aus10eww
    aus10eww is offline Registered
    Join Date
    Feb 2011
    Posts
    0

    Driver Recommendations For P22NRXC-LNN-NS-00 Stepper

    Could any one give me a driver recommendation for steppers with these specs:

    P22NRXC-LNN-NS-00:
    Torque: 238
    Resistance parallel: 0.78
    Current parallel: 3.1
    V: 2.418
    Watts: ~7.254
    Inductance parallel: 3.1mH

    Thanks
    Reply With Quote Reply With Quote
  2. 02-23-2012, 09:39 PM #2
    James Newton
    James Newton is offline Registered
    Join Date
    May 2005
    Posts
    1397
    That appears to be a 5 or more wire motor, and if so, the Linistepper would drive it nicely.
    James hosts the single best wiki page about steppers for CNC hobbyists on the net:
    http://www.piclist.com/techref/io/steppers.htm Disagree? Tell him what's missing! ,o)
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. 6 leads stepper motor connect to TB6560AHQ stepper driver board
    By wf1318 in forum Stepper Motors / Drives
    Replies: 2
    Last Post: 07-25-2010, 08:19 AM
  2. Wanted DIY stepper driver circuit for 6 wire stepper motors
    By Colin300 in forum Australia, New Zealand Club House
    Replies: 5
    Last Post: 09-21-2007, 03:20 AM
  3. Brushless 3 phase DC driver recommendations
    By jkeyser14 in forum Servo Motors / Drives
    Replies: 2
    Last Post: 11-07-2006, 03:45 PM
  4. STEPPER DRIVER FAQ {Stepper/driver amp per phase match.
    By huios in forum Stepper Motors / Drives
    Replies: 0
    Last Post: 08-27-2006, 02:43 PM
  5. stepper motor recommendations
    By mtechserv in forum Stepper Motors / Drives
    Replies: 0
    Last Post: 11-13-2004, 05:47 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules