[nanmol]

30-day free trial of SYNERGY CAD/CAM Software

[Spezzaferro]

wow. I didn't know they still existed.
I used weber prompt back in the late 80's early 90's.
we switched to synergy in 95 and it was unix based. We tried the windows version in 98 or 99 and i remember just the support cost over $2000 a seat so we chucked it. But at the price it's at, not bad, it's pretty powerful software.

[nanmol]

wow. I didn't know they still existed.
I used weber prompt back in the late 80's early 90's.
we switched to synergy in 95 and it was unix based. We tried the windows version in 98 or 99 and i remember just the support cost over $2000 a seat so we chucked it. But at the price it's at, not bad, it's pretty powerful software.

We have recently changed our pricing. These prices are per-seat. A network license can be run to allow multiple computers to access the software up to the licensed number of seats.


CAD includes:
Standard Geometry Creation
Drafting
Variational Design Module (Parametric design)
CAD = Free

CAM includes:
CAD (see above description)
Geometry Based Manufacturing
Generic Post Processors
Tool and material Libraries
Up to 2 Customized Post Processors (Limit: 8 hours customization time)
3 to 5 axis Positional Milling Pockets
Holes through our Hole Features - Define entire hole operations instead of
on a tool by tool basis.
Facing etc.
Turning
Turning with Live tooling
CAM = $250.00 US


3D Surfacing includes:
CAD (see above description)
CAM (see above description)
Synergy 3D Surfaces
Surface modeling
Multi-axis milling capabilities
3D Surfacing = $795.00 US


Solid Modeling includes:
CAD (see above description)
CAM (see above description)
3D Surfacing (see above description)
Parasolids based Solid Modeling
Direct machining from Solid models.
Solid Modeling = $1250.00 US

Annual Support (support and software updates) = $600.00 US
System or Post Processor Customization = $600.00 US per day
Training at Weber = $600.00 US per day