How can you override x axis feed to get off x axis limit switch?
Results 1 to 3 of 3
-
03-01-2012, 04:17 PM #1
Registered
- Join Date
- Aug 2010
- Posts
- 69
Override travel to get off limit switch...
-
03-01-2012, 04:52 PM #2
Registered
- Join Date
- Mar 2011
- Posts
- 463
That depends on the vintage of the machine and the control, but for most of them with the A2100 (which I think you have) if you hold the green power-on button in it will force the drives to stay up so you can jog off the overtravel.
Once you are off the overtravel switch, release the button and the machine should stay powered up.
-
03-01-2012, 05:39 PM #3
Registered
- Join Date
- Aug 2010
- Posts
- 69
Got it.
Reply With QuoteSimilar Threads
-
Cnc lathe override limit switch problem fanuc t15
By tomislav_kozul in forum FanucReplies: 1Last Post: 12-31-2011, 10:59 PM -
homing limit switch travel
By tomcorden in forum Mach MillReplies: 1Last Post: 12-24-2011, 12:46 AM -
Delta 20 travel limit override
By hawthorne in forum DynapathReplies: 2Last Post: 07-19-2011, 03:42 AM -
adding rapid override switch to 3T?
By etpm in forum FanucReplies: 7Last Post: 03-25-2011, 10:16 PM -
limit switch override
By swarfmacdaddy in forum CNC (Mill / Lathe) Control Software (NC)Replies: 5Last Post: 12-12-2004, 10:47 AM
Posting Permissions
